accessories – OMG Yarn (balls)
Browsing Tag

accessories

Guest Post: Petticoats Are Sew Awesome, Let’s Learn How to Make One! (Part 2)

October 5, 2017




Now that you’ve met Shirley Will of Faery Craft, let’s get on with how to make a petticoat.

Petticoats Are Sew Awesome, Let’s Learn How to Make One! (Part 2)

What You Need:

  • 8 or 9 yards of 72″ wide netting (tulle, crinoline, etc) –  I use very stiff netting and advise my customers to wear stockings so it won’t feel scratchy. For a friend’s wedding, though, I used a softer chiffon; she’s on the autism spectrum and needs non-scratchy fabrics no matter how many layers. It didn’t “poof” as much, but it still looked gorgeous.
  • For the waist layer, you can use a different fabric, such as wedding satin – One or two yards is fine, depending on your measurements. You’ll be doing the calculations first, so you’ll know in advance how much you need. If you go this route, you’ll only need 8 yds of netting for the ruffles.
  • 48 yds of ribbon for the hem – I use a narrow ribbon, either ⅜” or ½”. You can use either a matching or contrasting ribbon.
  • Wide, double-faced satin ribbon or blanket binding, a couple of inches larger than your waist measurement – You can also double over a strip of fabric to make your own waistband, but after dealing with all the ruffles, you’re not going to want to deal with much else.
  • One or two large sew-in snaps – depending on the width of your waist ribbon.
  • Sewing thread – matching or contrasting, depending on the look that you want.
  • Lots and lots of straight pins
  • Rotary cutter – You’re really going to want one of these. If you don’t have one and want to start a petti before you can buy one, see if you know someone who will let you borrow theirs. You can certainly cut the strips with scissors, but the cutter makes it so much easier that it’s ridiculous.
  • A way to measure your strips as you cut – You’ll see me using a rotary cutting mat, and it has gridlines on it. These are pricey as heck, so if you don’t have one yet, I’d suggest faking it. You can mark out the width you need with masking or painter’s tape, which works on cutting tables, floors, and even carpet. You’ll need to maintain a constant, even width, so doing all this is to your benefit, trust me.

OK, got everything? Let’s get to cutting!




You’re going to need a total of 8 very long strips of fabric; 9″ wide and 8 yds long. For a shorter petti you can use narrower strips, but generally the length of your skirt depends on how long your waist layer is. This is why I sew up the ruffles first; it comes in handy in figuring out how much length you still need. Oh I know, you can measure it all out beforehand – but reality sometimes messes with you, and this way is much easier.

OK, so there’s my pile of 8 yds of net. Now to unfold it. I cut one layer at a time. They all NEED to be exactly the same width, or else parts of your petti are going to be shorter than others. How do I know this? NO REASON, LET’S MOVE ON, SHALL WE. *wink*

This picture was taken later at night so the colors look different.

Here’s one strip cut and folded up off to the side, and the second strip started. I use a metal yardstick to hold the edge down. I put my left hand over to the other side of the 9″ mark to steady it, but be sure not to pull, because netting will stretch a bit. Now sometimes my cut line does wobble, but I haven’t strayed more than ¼”, so I should be OK when I stitch the layers together.

You’ll get exactly eight 9″ wide strips out of a length of 72″ wide netting. Get that all out of the way first; this part doesn’t take any brainpower, but it is the most annoying; it’s all cake & pie from here! 🙂

Maybe they won’t be ALL 9″ since netting bolts usually say ’70-72″ width’. But that’s ok, most of them are close!

Do your six strips for the bottom ruffle at 9″. Measure what you have left. Mine wasn’t a full 18″, it was only 15″. So, I cut it down the middle for my two strips for the middle layer, which is now 7 ½” wide.

Now that they’re all cut, sew the strips together – sew two together and set aside, then sew the other six into one big, long strip. This is what I do, but if you only want to gather half the petticoat at a time, leave the two middle fabric strips alone, and sew the other six into two 3-piece strips.




I use a light-weight needle on my machine, like for chiffon. I don’t put a stabilizer or anything under it; it’s never been a problem for me.

I sew a straight stitch seam down, just my normal stitch length. I keep my left hand on the fabric to guide it, but don’t pull tight, or it might pucker.

Without cutting the thread, pull the fabric toward you, turning so that you can sew the seam allowance down. Open up the fabric and lay flat, pushing the seam flat off to one side. I try to push all the seams in the same direction, but when all the ruffles are gathered, you really won’t be able to tell.

Once you’re in position, sew down on top of the seam allowance to keep it flat. I use a zig-zag stitch here, but you can use an overlock stitch or even a decorative one. I use a cute vine-style stitch for my wedding pettis.

Now the fun part (or “fun” depending on how you deal with repetitive action, lol). I knit and crochet, too, so I’m good with it. If you’re not, just keep reminding yourself how cute it will be when it’s done.

The no-gather technique is this … find the middle of each set of strips. Pin together with right sides together; this will be the edge that the seam will be on. Here’s a pic of the two middles. Yes, I commandeer the whole living room floor for this! If you have a nice recliner or something, you can drape the excess fabric over the arms.

Now, without twisting the strips, slide your fingers along the edges until you find the beginning of the strip. I work to the left, but it really doesn’t matter. Pin together right sides together like you did with the middles.

In the picture above we see the middles pinned together, and off to the left, the beginning of each strip. In the center, the piles netting left to pin. I did say you’d need lots and lots of pins! If you’re only working with half the petticoat at a time, it will look the same, but the fabric piles will be smaller.




OK, now. See those piles of fabric strips? Time to find the center of each one! I do the top first, since it’s smaller. I pull the two pinned pieces together, and keeping it folded, slide my fingers along the edges until I reach the center. I mark the center with a pin, and let the two edges fall back open when I set it down. Sometimes I’ll actually pin it to the arm of the couch or something so I don’t lose track of it.

Then, I move to the other pile of fabric and, using the exact same technique, find the center. When you do, mark it with a pin in case you drop it. Not that I do this all the time or anything. But I do.

There’s the second set of “middles”, with the beginning of the strips off to the left there. Mine are pinned to the carpet, right sides up. It doesn’t matter how you keep track of the right sides/ top of strip, as long as you do. It’s easiest for me to make sure the head of the pin is on the right side, but if you have a different way that works for you, go for it. The only thing that matters it that it makes the process easier for you!

When you find and pin the centers, it doesn’t have to be done with mathematical precision. You’re just ensuring that you have an even distribution of ruffles all around your petticoat. Some video tutorials of ruffles start with people just sitting down at the sewing machine and scrunching up the longer side as they go. This stresses me out! I keep thinking “how do you know it won’t be more ruffly on one side?” “how do you make sure you don’t end up with extra at the end?” Well, this is what I do.

Eventually, you’ll be able to just stretch out both arms and reach both “middles”. Here, the midpoint that you’re looking for, of the center petti tier, is to the left, and the one of the bottom tier is to the right.

This is about as close together as you want to get your pins. I used to pin them down flat into pleats, but it doesn’t make any difference in the way the finished petti looks, so now I just scrunch it up and guide it under the presser foot as I sew. Much like those brave video tutorial teachers, but with pins in the middle to keep me from scrunching too much or too little.

Keep pinning, moving to the right, continuing to find the centers of the pinned … loops, I guess? You’re going to end up with a top strip that lays flat, with the much larger bottom ruffle pinned in even bunches on top of it. At this point, I’m settled in with a nice beverage, with many, many yards of tulle draped all around me. When I get everything to the absolute center pinned, I’ll have to stand up to start finding the centers again. I’ll continue to pin from the left to the right, so that by the time I’m done, I’ll be at the opposite edge of the petticoat.

At this point, you probably see the advantage of doing half of the petti ruffles at a time. I’ve done it, it is easier. When you get both halves pinned and the seams sewn, you then sew the two halves together at one of the side seams.




All pinned? Sew the seam along the top the same way you did between the strips. The initial seam is done with a straight stitch, sewing down all the scrunches/gathers. When you’re done, open it up so the fabric is flat, push the seam allowance down, and go over it with a zig-zag stitch, or whatever you’re using. I push the seam downward toward the hem, but like I said before, it doesn’t really matter; you can’t really tell when it’s finished.

It does make a difference if you don’t sew it down at all. Not only does it look more polished, but it’s more comfortable to wear, especially if you’ve used a stiff crinoline.

Well, we’ve reached the end of Part 2 of constructing a petticoat! Part 3 will arrive soon. We’ll see you then.





Photos belong to Shirley Will of Faery Craft.

Want to be notified when new patterns are released? Want to find out when new guest posts are up? Just plain enjoy this site? Join my email list!


How to Dye Yarn with Kool-Aid

October 3, 2017




Way back when, in 2011, I had just become a stay at home mom and I needed to find some ways to pass the time. I opted to hone my fiber arts craft and spent the days knitting and crocheting.

One day, my mother mentioned to me that I should try dyeing yarn with Kool-Aid. And I did! I was a long process. I didn’t know about putting yarn into hanks yet, so I ended up with a ton of yarn barf.

Of course, over the years I taught myself a few different dyeing techniques and learned ways to make dyeing easier for myself. Recently, I was looking for something to do with my 8-year-old and 3-year-old sons toward the end of the summer break and I decided to go back to basics.

Since speckle dyeing is the trend right now, I wanted to teach the boys that technique, but without using the professional powdered yarn dyes I use. I thought, let’s dye yarn with Kool Aid!

Even better, why not make something for them that they could show off out of that yarn that they made. The idea was instantly a hit with the kids; they always love watching mom dye yarn, looking like a mad scientist in the process.

Here we go!




What You’ll Need:

  • White vinegar
  • A Liquid Measuring Cup
  • One hank of an animal based fiber yarn (we used my OMG Liberty yarn base; a worsted weight 100% Superwash Merino Wool) – cotton and acrylic yarn will not work for this technique
  • One Large Pot (at least 4 QT)
  • Water
  • Stove
  • Kool Aid packets of any flavor without sugar added
  • Ice Cube Trays, at least 2
  • Freezer
  • Sink
  • Dish Soap
  • Laundry Rack or Hanger

Instructions:

Prep Work – Make Kool Aid Ice Cubes

  1. Using hot water, mix approximately 6 ounces (3/4 cup) of water with one Kool Aid packet until the powder is completely dissolved. Use as many different colors as you like, but remember that the colors may mix, so remember your art classes from school. Purples and greens together will end up brown or other weird colors.
  2. Pour mixture into ice cube tray. If you are using multiple colors, use multiple trays. My mixtures of each color created about 6 to 8 ice cubes.
  3. Place trays in freezer and let freeze.

 Prep work – Soak Yarn

  1. Fill sink with luke warm water and add 1 cup of white vinegar.
  2. Place desired amount of yarn in water and soak it for 20 minutes.

 On to Dyeing Your Yarn

  1. Place presoaked yarn in a large pot. It does not have to be in there in any specific way, but make sure the entire bottom of the pot is covered and your yarn lays flat.
  2. Add about one cup of warm water evenly to the yarn in the pot. This is so that the yarn does not burn when heated on the stove. Make sure that there is not too much water in there. The yarn shouldn’t float and there should not be enough water for the colors to distribute through the water.
  3. Place ice cubes randomly on the surface of your yarn.
  4. Put pot on stove and heat yarn on medium heat for 20-30 minutes. Make sure that the yarn does not burn. If your water boils off, add more to the pot.
  5. Remove pot from heat. Your yarn is hot and so is your pot. Use oven mitts to carry the pot and dump yarn in the sink.
  6. Let yarn cool for 10 minutes in sink.
  7. Wash yarn with a little bit of dish soap and cold water until the water runs clear from the yarn.
  8. Hang yarn to dry.




That’s it! You have a skein of yarn dyed and ready to craft with.

3-year-old Sharky chose Grape, Pink Lemonade, and Cherry for his flavors/colors.

 

8-year-old Peanut chose Blue Raspberry, Pink Lemonade, and Cherry for his Kool-Aid flavors/colors.

 

Of course, I started knitting these hats right away.

Want to learn how to make the kids’ cute cabled hat that I made with their yarn?

Kool Aid Hat Preview

How cute are Sharky and Peanut?!

You will need the following knitting skills to complete this project:

  • Knit
  • Purl
  • Knitting in the Round
  • Purl two together
  • Knit two together

The gauge is approximately 5 stitches per inch in the cable pattern.

The pattern is written for use with OMG Liberty (my worsted weight yarn) or Lion Brand Wool Ease (worsted weight). Sizes range from baby (about 12 months) to adult.

Lion Brand’s Wool-Ease is just a little bit different than OMG Liberty, so instructions include the different needle sizes needed.

Tip: I’ve made several of these hats to test the pattern. If you find yourself playing yarn chicken with OMG Liberty in the adult size, use the smaller cast on for stitches, but follow the rest of the pattern as is, it’ll fit adult size too.

Click here to buy the pattern.




Want to be notified when new patterns are released? Want to find out when new guest posts are up? Just plain enjoy this site? Join my email list!


Let’s Do a Yarn Study: Alternatives to Wool Blends for Crochet Shawls

August 28, 2017



Oh my goodness! Why would I even do a write up about yarn that isn’t mine?!

Well, I’m a small-ish independent dyer, designer, and fiber arts business owner and I certainly am not at the point where I have all my bases covered yet (see what I did there?). That means I have friends and family that may not be able to use my yarn due to wool allergies, cost, etc.

It doesn’t mean that these people cannot get the most out of my patterns or even patterns that I highly recommend for my yarn or a good alternative.

I’ve decided that, since I am a former yarn shop owner, and like to be inclusive of everyone, even people who aren’t using my yarn for whatever reason, I want to pass on my recommendations. I do it for the love of yarn.




What do I mean by a yarn study?

Sometimes you see stitch samplers for crochet, knit, cross-stitch, which are basically studies on different techniques.

In this case, I’m working the same project in different yarns and comparing the qualities of each yarn in the hopes to better understand different fiber content, stitched fabrics, and thus inspiring new designs in various yarns.

For this yarn study I chose the Swagger Shawl by Barb Mastre Stanford because it’s a quick crochet project and with less experience designing for crochet, I felt that this would be the perfect opportunity to play with different yarns for crochet projects. And she so graciously designed it for OMG’s expansion back in 2014.

The yarns I chose are:

  • Caron Cotton Cakes
  • Lion Brand’s 24/7 Cotton
  • Knit Picks’ Shine Worsted

The yarns I chose are good Worsted weight cotton alternatives to OMG Liberty, which is what the Swagger Shawl calls for.

Cotton Yarn: The Good, The Bad, and the Ugly
Cotton yarns that are wallet-friendly are notoriously rough and not always the first choice for a shawl that you would wear next to your skin.

When you are lucky to find a good cotton yarn that is soft AND relatively inexpensive, you notice that it has a wonderful drape, but can lack “memory”, meaning it doesn’t always bounce back from stretching.

It is because of its drape that cotton yarns can be good for shawls and other accessories including home décor items.

So here we go!




OMG Liberty (Pictured at the top)
Fiber content: 100% Superwash Merino Wool
Put up: 220 yards per 100 gram skein

  • Pros: OMG Liberty is fluffy, takes up dye very well, and has excellent stitch definition. When crocheted for the Swagger Shawl it maintained its springiness and drape.
  • Cons: As I mentioned in my introduction, price for larger projects with OMG Liberty might make this yarn cost prohibitive for some. That’s exactly why I did the yarn study. It’s $22 per skein, so you’re talking 66 bucks to make this shawl, plus the cost of the pattern.

Here are my recommended alternatives if you absolutely have to make this shawl (or any other project that might call for OMG Liberty).




Caron Cotton Cakes
Fiber content: 60% Cotton, 40% Acrylic
Put up: 211 yards per 100 gram ball

Added on at the last minute after discovering this new yarn at my local Michael’s store, I included Caron Cotton Cakes, because I thought that Swagger would look pretty awesome using this new yarn.

  • Pros: Pricewise, you’re only talking $4.99 a ball at Michael’s (or less since we’re nearing the end of cotton yarn season in the US). This yarn feels like chenille or microfiber fabric, so it is amazingly soft. I also like cotton/acrylic blends because it adds a little bit of memory to your stitches without losing any of the drape from cotton and this yarn certainly lives up to that. The self-striping aspect of the yarn made the shawl itself look unique compared to the other samples I crocheted.
  • Cons: The only issue I saw with this yarn was one ball had a knot in it like it had been cut and tied to complete the ball. This is something that occasionally happens with all yarn companies, so not necessarily a con per se.




Lion Brand’s 24/7 Cotton
Fiber content: 100% Mercerized Cotton
Put up: 186 yards per 100 gram ball

  • Pros: Pricewise, you’re only talking $5.49 a ball at JoAnn Frabrics (or less since we’re nearing the end of cotton yarn season in the US). I like mercerized cotton yarns for baby items, so this Lion Brand equivalent was screaming my name. It has a beautiful shine and drape in the finished shawl. I am loving wearing it around too.
  • Cons: It’s a little rough to touch, but it is hard wearing. With blocking, the yarn softens up a bit.





Knit Picks’ Shine Worsted
Fiber content: 60% Pima Cotton, 40% Modal
Put up: 75 yards per 50 gram ball

  • Pros: At $2.99 a ball, this yarn is at a great price point as well, but you will need 6 balls of this to make the Swagger Shawl. It is soft, shiny, and the drape is magnificent. This is the softest cotton blend I’ve found so far, and I’m happy that I tried it out! The yarn blocks well and even held up to me ironing it.
  • Cons: With a 50 gram put up, it means more ends to weave in. Other than that, I experienced one knot, but as I said earlier, I know that’s normal so it’s not a con for me.

Since gift season is quickly approaching, I’m sure you’ll want to use some of these good alternatives on your Swagger Shawl.

Here’s a link to the pattern: Swagger Shawl by Barb Mastre Stanford

Let me know how you like the pattern and feel free to tag OMG Yarn on FB or Instagram when you make yours!




Want to keep an eye out for new knit or crochet techniques? Want to be notified when new patterns are released? Just plain enjoy this site? Join my email list!


Gritty Photography, Free Spirits and The Oversized Sleeveless Tunic

June 28, 2017




 I like photography that stands out. I also like yarn that stands out and speaks for itself. When paired with the perfect project, photography and yarn can certainly make indie dyed yarn into a work of art.

The idea behind the Oversized Sleeveless Tunic design was to have a simple, oversized top that I could wear anywhere AND show off my yarn in a way that doesn’t take away from the speckled colorways I have been dyeing lately.

With the photography, I got adventurous in every way.

iPhone Photography

I use my iPhone for photography these days. Gone are the days where I had the time to grab my camera, take photos, download photos, edit photos, and then choose the best to go into patterns.

I take photos and edit them right in Instagram, send them to myself, and they get done in a much more streamlined manner (if that’s not another blog post, I don’t know what is…haha). The results are more unique photos and way less time is spent fighting with computer software to do what I want it to do.

The photos from the Oversized Sleeveless Tunic were purposefully grittier. They’re a throwback to when photography was new and a bit more of a raw art.

They’re also an homage to my favorite cinema director Tony Scott who experimented with older hand cranked cameras in the movie Man on Fire. The raw cinematography contributed to the die hard emotions of the film and was a way to draw the audience in to the wild spirt that comes alive when avenging the apparent death of a loved one.

I got a little adventurous and took the short walk to our lakefront in order to get a unique backdrop from the Lake Michigan shore. The free spirit in me has always loved looking out onto the lake and seeing nothing but endless skies and, of course, endless possibilities.

Showing off what gorgeous fabric that OMG Rushmore and the new color Newsprint is Dead can do, I created the Oversized Sleeveless Tunic.




Newsprint is Dead

The colorway wouldn’t exist if it weren’t for my three-year-old. I was playing with an idea (I’ve been looking for black speckled yarn that looked like newspaper EVERYWHERE) and layered grey and black together. My toddler snuck up behind me and asked, “What you doing?” half-jokingly, because he knew what I was doing.

I asked if I should add another color to the yarn and he said, “Yes! Pink!”

The result: A page of newspaper that looked a little bloody before the dye set. It almost looked like a murder scene. Perfect.

Oversized Sleeveless Tunic

As the pattern description says, as a mom of three young kiddos that are always on the go, I need to wear comfortable, loose clothing that allows me to keep up with all the fun. One of my go-to clothing items is a tank top or sleeveless shirt that I can layer under a cardigan or over a t-shirt.

The Oversized Sleeveless Tunic is designed to be a go-to knit that you can actually wear, be comfortable, and stylish at the same time. Pair this with solid color yoga pants, layer with your favorite tank tops and/or cardigans and knit it with your favorite sport weight, hand dyed yarn.

This design is beginner-friendly and perfect to show off a speckled, variegated, or even solid colored yarn. There’s six inches of ease, so your top will have a gorgeous drape to accentuate almost any figure shape.

It is constructed from the bottom up and in the round. The front and back are worked flat and there is a faux seam on the side that tapers to the under arm.

The day that I photographed this, I walked down to the lakefront and back, and it was just so comfortable that I left it on ALL DAY. I ran to pick up my boys from their dad’s house, I took all three kiddos shopping at Target, and then came home to rest. Mom clothing needs to feel un-impeding of the process of caring for kiddos and this did just that.

It also will go perfectly with a black cardigan I just bought, so it’ll likely get put into the rotation of my mom wardrobe aka the mom uniform.

The pattern is available for purchase in my Ravelry store and my Etsy shop as well. See links below.

Limited time only: The pattern is free in my Ravelry store until July 4, 2017, no coupon code necessary.




Want to be alerted to new patterns, tutorials, and some fun snarky blog posts? Join my email list!

 


How to Take Your Shawl Game to the Next Level: Applied Lace Borders

May 17, 2017




Shawls are one of my favorite things to knit. They’re versatile wearables, great for every season and occasion, AND I absolutely love how simple, beginner-friendly shawls show off hand dyed yarn.

Now, if you really want to take your shawl knitting game to the next level, you may want to try a couple different patterns with new techniques.

My latest shawl design, the Water Shawl, uses an applied border (aka applied lace border or knitted-on border).

What is an applied lace border?

An applied lace border is a type of border treatment where the stitches are worked at a 90-degree angle to the body stitches. In all seriousness (this is a Melina-ism phrase), nothing special is really done, you’re just casting on border stitches and then working the last stitch of the border row with the first live stitch from the body (k2tog or how you’re otherwise instructed by the designer). Then you turn your work, and the next live body stitch is worked together with the first stitch of the next wrong side border row.

This will all make sense in a minute here.

In the case of the Water Shawl, you end up working the body of the shawl in a top down fashion. Then, on a right side row, you cast on the proper number of border chart stitches and start working them, working a k2tog with the last border row stitch, and the first live stitch from the body.




Dangit, Melina, that makes absolute no sense. Show me some pictures dagnabbit.

I know, I know. So, let me show you, using the Water Shawl to demonstrate:

    1. First, to set up, when I finished working all the charts for the body of the Water Shawl, I turned the whole work so the right side was facing me. Place a marker before your live stitches (to alert you when you get to the live stitches), and then, using the backward loop method, cast on the number of border stitches necessary. In the case of the Water Shawl, I cast on 29.
    2. Work the first row of your border chart/instructions to the last stitch, which will get you to one stitch before your marker like this: 
    3. Slip the stitch from your left needle onto the right, remove the stitch marker, and place the stitch you slipped back on the left needle. Essentially, you’re just removing that stitch marker for a second.
    4. Now, knit two stitches together (k2tog)……and turn so the wrong side is facing.
    5. If you notice, the working yarn is now on the left needle. The next live stitch from the body is on the right needle. Slip that live stitch onto the left hand needle and put your stitch marker on the right needle.
    6. Now, purl two together (p2tog).Do you see how that works? Here’s what it should look like after you purl those two stitches together:
    7. Now you can go on to finish the rest of the row as written.
    8. Repeat steps 2 through 7 ad nauseam et infinitum (until you run out of live stitches).

    Why use the applied lace border in a design?

    The applied border allows for extra drape along the border. The Water Shawl is definitely a huge beast of a shawl and needs all the help it can get to get that swagger going. An applied border seemed like the only option, really.

    I think it also adds a unique dimension to any design. Honestly, anytime I see any knit or crochet item, I’m analyzing its construction (be warned, as an introvert, I’m probably more into your sweater until I get to know you better…lol). With this type of border, your stitches are perpendicular to the body stitches, so as a knitter and a designer, I like seeing the stitches go in different directions.

    Want to make the Water Shawl? Click here to go to Ravelry to purchase or click on the patterns tab above and that will take you to my Etsy store which also has the pattern available.




    Stay in touch, join my email list!


Your Complete Guide to OMG Yarn’s Fingering Weight Yarns

April 19, 2017




Picking the right yarn to dye is difficult, just as picking the right hand dyed yarn to make your next project is. I, personally, can be a little bit of a yarn snob, because I’ve gotten spoiled from playing with so many different yarns while owning a yarn shop (and of course, I was able to sample some amazing yarns that I didn’t even carry).

I know you’ve been tempted by the gorgeous photos I share on Instagram and Facebook, but there’s no way of telling how great and soft these yarns are. This is the first in a series of posts to entice you a little bit more to try the different yarns I create. Let’s talk about OMG’s awesome fingering weight yarns, OMG Calatrava and OMG Vegas.

All About OMG Calatrava

Named after the architectural beauty known as the Milwaukee Art Museum (located in downtown Milwaukee, Wisconsin, the city in which I grew up), OMG Calatrava is an energetically spun, light fingering weight yarn.

OMG Calatrava’s details: 100% Superwash Merino Wool; gauge: 7.5 sts/in on US 2; approximately 400 yds/3.5oz.

I chose this yarn because of how it is spun and takes dye (yep, I try dyeing every yarn before I select it). It is great for shawls, scarves, and other accessories.

Because of the tight spin of the plies, you can even use it for socks. In fact, my most worn pairs of socks are made from OMG Calatrava and they hold up well, even without nylon in it!

Even though it is tough enough for socks, it is soft enough to wear next to the skin and great for baby wear, like Ola’s dress that I keep sharing pictures of (and with this little cutie wearing it, how could I not keep sharing?). I also used OMG Calatrava in the color Pisces for the latest pattern I released, the Mesa Shawl.

The Glamour of OMG Vegas

Chloe Shawlette

If you need yarn that is a bit more fancy, something with a little glitz, try OMG Vegas. A little heavier fingering weight yarn, OMG Vegas has a bit of sparkle like the lights of Las Vegas.  This would be gorgeous in any accessory imaginable or as a great gift to the yarn lover in your life.

The plies of this yarn are a bit more loosely spun, but it is not splitty, so it can be worked in knit or crochet.

OMG Vegas’ details: 63% Superwash Merino Wool, 20% Silk, 15% Nylon, 2% Polyester Glitz; gauge: 8 sts/in on US 2; approximately 420 yds/3.5oz.

My first shawl design, the Chloe Shawlette, was done in OMG Calatrava, and I still keep the sample around. It’s next to the skin soft, has a wonderful drape, and takes the dye just a little bit lighter than my other yarns, showing its unique fiber personality.




Intrigued? Well, head on over to my Etsy shop and try a skein or two of these fingering weight yarns! Use coupon code OMGYARNBALLS for a 10% discount since you’ve spent the time reading about them.

Want to keep up-to-date on all things OMG Yarn (balls)? Subscribe to my email list!


How to Choose the RIGHT Yarn for Your Next Project

April 5, 2017




Having good results with any knit or crochet project depends a LOT on the yarn you choose to work with. It can make or break a design and it can determine how much you (or a lucky recipient of your hard work) love to wear the completed item.

As a yarn shop owner, I always enjoyed helping customers pick out yarn for all kinds of patterns: sweaters, shawls, afghans, mittens, you name it. I know some shops like to make the sale, but I liked happy customers, and nothing made customers happier than getting the right yarn every time (or most of the time…). My quaint little yarn shop depended on repeat customers who depended on what I’d picked out for them. Let’s just say that I had a couple repeat customers who had such amazing taste in yarn, I couldn’t wait for their next visit to sit down and page through my catalogs and samples to find just the right yarn that I had available through suppliers (Dear Skacel, your yarn catalog was my favorite to page through and fawn over).

To be honest, I’ve even walked through my local JoAnn’s and helped people select good yarn for a project there – I mean, that’s the kind of yarn I had access to before I was introduced to yarn shops. When you don’t have someone to help you look through yarn or who is pushing the sale of yarn you don’t need or want (yes, there’s such a thing), you need to know what you should consider when picking the right yarn for your next project. So let’s take a look, shall we?

The Project

Of course, the first question I asked was, “What are you making?” Is it a sweater/jumper? Is it a shawl or scarf? Is it meant to be worn next to the skin? Is it meant to be worn over or under something? All of these are important questions. I mean, would you want to wear a scarf next to your neck that has itchy or tough fibers that poke at your skin? Probably not.

Budget

Believe me, I know budgets can be tight too. If you don’t have a big box store nearby, your local yarn shop is the answer, however, those boutique level yarns can get pricey. Not everyone can make a sweater or afghan out of yarn that costs $20 for each 100g ball. Remember, though, you get what you pay for with “economy” yarns.

The small print to read here though is: even expensive yarn can have poor manufacturing, so make sure you read reviews if you can before you buy. I won’t blast any yarn companies in particular, but nothing peeved me more than yarns from manufacturers with poor quality control. Self-striping yarns at $15-$25 per ball with knots in them, abrupt color changes, or out of sequence color changes can totally throw off your project’s aura in a heartbeat.




Yarn Composition and Characteristics

The same yarn may behave differently for different knitters/crocheters AND can behave one way for a knitter but another way for a crocheter.

Ahem, BIG CHUNKY FURRY EYELASH YARN IS NEAR IMPOSSIBLE TO CROCHET WITH! Well, at least for me anyway. The fur hides the stitches and they’re sooooooooo difficult to keep track of. I always ended up with weirdly shaped scarves.

If your project needs some drape to it, like for a scarf, shawl, skirt, or dress, you will want to choose a yarn that will do that. Plant or non-animal based fibers are always good for those types of projects (think cotton, bamboo, silk, tencel, etc.).

If your project needs to insulate or keep someone rather warm, choose animal-based fiber blends. Alpaca fibers, in particular, are hollow and thus insulate really well, so you’ll notice that projects made from this luxury fiber will keep you warmer. You might want to avoid alpaca for summery shawls or accessories.

Yarn “Memory”

Projects that require some bounce-back or memory – think projects with ribbing like socks or sweaters – you want to use fibers/yarns that will meet that challenge. Most cotton fibers will create loose, drapey fabrics, so they will lose their shape with wear or added moisture from sweat. As a result, I don’t usually suggest cotton for socks or sweaters.

Notions and Tools Needed

You also need to consider whether or not you’ll be able to use that yarn with all the notions and tools you’ll use to complete the project. If your project needs buttons or zippers, avoid single plies or lofty fibers that will get caught or tangled.

The Wearer

As a mom of three, I LOVE to make little sweaters and things for my kiddos. When you need to knit or crochet for babies and kids, you have to remember that they will fidget, cry, or rip off any clothes that are not comfortable. That’s why I don’t like to use wool for their projects. If I do need to use wool or that’s my absolute only choice, I pick merino wool, which is the softest to work with.




You will also need to consider if the person you are making the project for has any allergies. If they have allergies to specific dyes, like from hand dyed yarn, or to wool, you will need to use alternative fibers that are a good substitute for what you cannot use. Cannot use wool, but need something with memory to it? I am a big fan of Kraemer Yarn’s Tatamy yarn – a cotton/acrylic blend that comes in worsted or DK and is soft, hard wearing, and not quite as memory-free as most cottons.

The Case of Hand Dyed and other Novelty Yarns

Big shocker, I’m going to add a special section about hand dyed yarn. When working with hand dyed yarns or intricate novelty yarns, you want the yarn to speak for itself in the project. So if you’re looking at these kinds of yarn without a project in mind, pick the project to show off the yarn. Most simple, beginner-friendly projects, are GREAT for these kinds of yarns. Single stitch scarves, mostly stockinette stitch sweaters, non-lacy items, those would be the best to choose. If you have a beautifully mosaic dyed sock yarn, vanilla socks are the way to go.

I hope this helps the next time you’re stuck on what yarn to use for your next fiber arts endeavor. Let me know how it goes!




Want updates? Want to be alerted when my next pattern is available? Join my mailing list!


Free Crochet Pattern: Make This Beginner Friendly Shawl in a Weekend

April 3, 2017

No matter what it is we like to do, every single one of us has a go-to project for when we just need to mindlessly keep ourselves busy while practicing our craft. When I knit, it’s usually my toe-up sock pattern that I make. When I crochet, it’s this cute little shawl, and I’ve decided to share my little pattern with you!

The Mesa Shawl is a basic, beginner-friendly crochet shawl pattern that is worked from the top down. The edges on the sides of the shawl is inspired by the carved landscape of the Mesa Grande Ruins in Mesa, Arizona.




The subtle texture of the shawl, combined with it’s simple construction make this my favorite project to make when I absolutely have to knit or crochet, yet do not want to focus so intently on an intricate pattern. It is great to work on while relaxing in front of the television or keeping an eye on the kiddos.

As an accessory, the Mesa Shawl can be worn around the shoulders to keep warm on a breezy spring or summer night, or bundled around the neck in fall or winter.

The free pattern only contains instructions for the smallest size. The paid version of this pattern is available on Ravelry here, which includes all three sizes and zero ads.

What You’ll Need:

  • One 100g ball of your favorite Fingering Weight Yarn (shown here in ontheround’s Everyday Fingering Lite – 425 yards/100g, 100% Merino Wool)
  • One Size 7 (4.5mm) or H/8 (5.0mm) crochet hook
  • Scissors

As with most shawls, knit or crochet, gauge is not important here, but you want the stitches to be loose enough to create a fabric with a good drape to it.

Crochet Techniques You’ll Use:

  • ch – chain
  • hdc – half double crochet
  • sc – single crochet
  • sl st – slip stitch

Skill Level: Beginner




Mesa Shawl – Smallest Size Only (Wingspan approximately 60″ and Depth 6 1/4″)

Ch 276.

Row 1: Hdc in 3rd ch from hook and all the way across. Turn.
Row 2: Sl st in 1st 5 stitches, ch 1, sc in back loop only in next stitch and all the way across to 5 stitches before the end of the row. Turn.
Row 3: Sl st in 1st 5 stitches, ch 2, hdc through both loops to 5 stitches before the end of the row. Turn.

Repeat Rows 2 & 3 until 15 stitches remain. Fasten off.

Enjoy!




Want to stay up to date on this and all of my other patterns? Subscribe to my email list.


Moving Onward and Upward: “Resist” Beanie Pattern Now Available on Ravelry

March 21, 2017

I can be fierce and I can be strong. I stand in solidarity with my re-sisters.

International Women’s Day was on March 8th, so now what? Do we just go back to the inequity, lack of support and less than human treatment from before that day or do we plunge ahead with the call to make things better for all women?




I, personally, would like to see a better world for all three of my kids, not just my daughter. I have two very intelligent, caring sons and a beautiful daughter who would all like to see a world of possibilities for everyone in their lives.

As a business owner in an industry that is characteristically female, I would like to commit OMG Yarn and myself to the empowerment of other women seeking equality.

Let’s stop marginalizing women and their accomplishments. There was nothing I hated more than hearing, “Oh your husband must be a great accountant,” when I would talk about the success of my little yarn shop and other business endeavors. I earned my Masters in Business Administration when I was 24 years old. That was after completing a 4-year education in only 3.5 years at a competitive school. Did I mention I was there on a full scholarship based on academics? Do you see how I had to qualify that?

When you look at the statistics, African American women lead the way as the most educated group in America. So yea, as a group, they’re fiercely killing it, but still experiencing institutional racism, misogyny, wage gaps, injustice in the legal system, and much more than I care to share. Not right. Right?

Let’s stop shaming women for their choices. Every day, we make choices and someone is always standing there to shame us. Whether it’s the choice to work versus be a stay at home mom or any other choice, every woman deserves support, whether you think they’re deserving of it or not. I have translated for a patient who wanted to report a domestic violence nightmare. I have held hands in support of undocumented women experiencing the horrors of escaping oppression in their home country only to witness worse here. I don’t judge anyone for what they do and that goes a long way for bridging gaps.




So let’s support women for all that they do. The single moms holding down three jobs and going to school to make a better life for their children, my hat’s off to you. The mothers marching against injustice, my hat’s off to you. The women who make our lives brighter and more beautiful in every way, my hat’s off to you.

The top of the hat is a beautiful spiral.

I’m not just saying all this either. I do what I can to raise awareness through the arts. I always have and always will.

To show my ongoing commitment to the cause of women’s rights and the craftivism movement, I created the Resist Beanie. Honestly, I was inspired by the hard work of Donna Druchunas, a knit designer I have admired for some time.

The Resist Beanie is a crocheted hat with a filet crochet brim that spells out the word “resist” in filet crochet. With spring and summer fast approaching, the need for a lighter, cotton hat to support change has come up. Though it fits the average-sized head snugly, this hat is light, comfortable, and breathable, ideal for warmer weather. A portion of the proceeds from this pattern will be used to support local causes for the resistance, including small businesses that are mostly female-owned/operated.




The pattern is on sale through my Ravelry Store here. It is my new favorite hat and I’ve been wearing it since I finished it a few days ago.

I can be fierce and I can be strong. I stand in solidarity with my re-sisters.

I am committing to making the world a little bit more awesome for the next generation, and the road will be paved with yarn.

References.

Stewart, K. (2016, May 27). Black Women Are Now America’s Most Educated Group. Retrieved March 21, 2017, from http://www.upworthy.com/black-women-are-now-americas-most-educated-group.

This Crochet Mug Rug Will Leave You Saying “OMG”

March 21, 2017




My OMG Mug Rug has been gaining some interest for a few weeks now. As I mentioned in my post post titled “Crochet Design: Let’s Talk Filet Crochet“, I wanted to learn this new technique, so I sat down with my graph paper and plotted the OMG Mug Rug. I’ve been using the finished sample for it’s intended purpose and as a photo prop ever since.

So what is a mug rug anyway?

mug rug is like a little placemat for your favorite mug, sized to include a little place for a snack to compliment your beverage of choice. Most mug rugs tend to fit in the 4×7 to 12×8 size range, but they can be as big or as little as you want.

What you’ll need:

  • A ball of “Aunt Lydia’s Crochet Thread” in the Classic 10 size or any lace weight yarn.
  • A steel crochet hook, size 7 (1.5mm) or whatever hook matches the gauge for the yarn you’re using
  • Scissors (to cut thread when you’re finished)

Gauge is not important here, however, you will want to crochet tight enough for the finished project to be at least 4 inches by 7 inches.

See links below to order supplies.

Crochet Techniques You’ll Use:

  • ch – chain
  • dc – double crochet
  • sc – single crochet
  • sl st – slip stitch
  • tr – treble crochet

Skill Level: Advanced Beginner

You will need to be  able to follow a chart.

Make sure you read the instructions for each round before beginning each step. I detail how to do the corners after the main pattern of each round.




OMG Mug Rug
Instructions:

Body
Start by using filet crochet to complete the following chart:

OMG Mug Rug Chart (Opens a PDF file of chart)

NOTE: The chart is 28 squares wide and 20 squares tall. To begin, you will chain 88 stitches (85 to frame the bottom and 3 ch which counts as another dc). Since your first row on the chart is completely filled in, you will dc in the 4th ch from the hook and then dc all the way across and turn. 

Once you have completed the chart, you will have the base design!

Border
Now you will be working around the outside of the entire Body that you just completed from the chart.

Round 1: Ch 1 and sc around, working a [sc, ch 2, sc] in each corner. End with sl st to first stitch from beginning of the round.

Make sure you sc in every dc on the top and bottom and evenly spaced on the rows along the sides.  You should make sure that each side has a multiple of 7 stitches.

Round 2: Ch 3 (counts as a dc and ch 1 at beginning of round), sk st, *dc in next st, ch 1, sk st; repeat from * around, turning corners by completing a [dc, ch 2, dc] in each corner. End with sl st into 3rd ch at the beginning chains of the round.

Round 3: Ch 1 and sc around, working a [sc, ch 2, sc] in each corner. End with sl st to first stitch from beginning of the round.

Round 4: Ch 1, sk 1st sc, and sc in 2 sc, *ch 2, sk 1 sc, sc in next 6 secs; repeat from * to end, working a [sc, ch 2, sc] in the corner. End with sl st to first stitch from beginning of the round.

Round 5: Ch 2, *tr in next ch2 space, [ch 1, tr] 5 times in same ch 2 space; repeat from * in each ch 2 space to end, working a scallop in the corner space. Ch 2 at end of Round and sl st in end of the previous round.

Fasten off. Weave in ends. Lightly steam or iron to block.